渤、黄海生态环境模拟的参数敏感度空间差异分析

随着海洋生态系统模型的发展，生态变量增多，众多生物过程参数量值的确定成为制约生态环境模拟的瓶颈问题，生态系统结构区域性要求模型中的生态参数具有区域差异。为探究不同海区的关键参数及参数敏感度的空间差异，本研究在渤、黄海建立了ROMS-CoSiNE物理–生物耦合的高分辨率生态系统模型，并对13种生态参数的敏感度空间分布进行分析。结果表明:南黄海中部与渤海及近岸海域的敏感度差异较大。渤海敏感度最大的参数为决定光合速率的浮游植物P-I曲线初始斜率，其次为浮游动物捕食半饱和常数和浮游动物最大捕食率。而南黄海中部敏感度最大的参数为浮游动物最大捕食率，其次为浮游植物死亡率和浮游植物P-I曲线初始斜率。结合敏感度分布及浮游植物生物量收支得出，渤海水体透明度较南黄海偏低、浮游植物生长光限制较强，是引起浮游植物P-I曲线初始斜率敏感度在渤海高于黄海的主要原因。浮游动物最大捕食率及浮游植物死亡率的敏感度空间差异，受渤、黄海浮游植物生物量差异的影响，与生态系统中的高度非线性特征有关。     

An evaluation of Guided Regularized Random Forest for classification and regression tasks in remote sensing

New Earth observation missions and technologies are delivering large amounts of data. Processing this data requires developing and evaluating novel dimensionality reduction approaches to identify the most informative features for classification and regression tasks. Here we present an exhaustive evaluation of Guided Regularized Random Forest (GRRF), a feature selection method based on Random Forest. GRRF does not require fixing a priori the number of features to be selected or setting a threshold of the feature importance. Moreover, the use of regularization ensures that features selected by GRRF are non-redundant and representative. Our experiments based on various kinds of remote sensing images, show that GRRF selected features provides similar results to those obtained when using all the available features. However, the comparison between GRRF and standard random forest features shows substantial differences: in classification, the mean overall accuracy increases by almost 6% and, in regression, the decrease in RMSE almost reaches 2%. These results demonstrate the potential of GRRF for remote sensing image classification and regression. Especially in the context of increasingly large geodatabases that challenge the application of traditional methods.     

杭州湾中部实测波浪特性分析

利用杭州湾中部一年实测波浪资料,分析该地区的波参数统计变化特性,采用最小二乘法拟合得出相关参数之间的关系式,并统计分析了频谱特性。结果表明:杭州湾中部以小浪和轻浪为主,在各月分布较为均匀,年平均周期为2.97 s;最大一次波浪过程为冷空气影响所致,影响强度大于台风莫拉克;常浪向分布在东北至东南向,其中又以小浪出现较多,对应的波周期以2~4 s为主;强浪向主要分布在西北和东北方向,对应的波周期主要分布在3~5 s;多数特征波参数之间相关关系较好;由谱分析得知风浪占多数,且以单峰为主。研究结果可为相关工程和理论研究提供基础资料。     

两株南极枝孢霉属真菌Cladosporium sp.NJF4和NJF6的次级代谢产物研究

南极因其独特的自然环境成为潜在、重要的微生物资源库,是产生新型生物活性物质和先导化合物菌株的潜在种源地,南极微生物正在成为创新药物研究新的重要资源。虽然近年来对南极微生物次级代谢产物的研究逐渐增加,但与温带和热带微生物研究相比仍处于初级阶段。对从南极普里兹湾海洋沉积物中获得的两株枝孢霉属真菌Cladosporium sp. NJF4和NJF6进行次级代谢产物分离及结构鉴定,获得20个化合物。化合物结构类型包括甾醇(1)、倍半萜类(7—8)、生物碱类(9—14)、二酮哌嗪(2—5、15—17)、芳香酸(6、18—19)等,其中倍半萜类(7—8)为首次从枝孢霉属真菌中分离得到,以上研究将为丰富南极微生物次级代谢产物库奠定一定的研究基础。     

Raman microspectrometry, FT-IR and inclusion characteristics of gem garnets from Tanzania and Madagascar

Chemical composition, Raman microspectrometry, and Fourier transform infrared (FT-1R) and SEM-CL (Cathodluminescence) analyses are carried out for Tanzania and Madagascar garnets for locality identification. Inclusion study was sustained after electron probe microanalysis (EPMA). Needle-like illmenites, apatites and zircons were the most common solid inclusions in Tanzania garnets. Madagascar garnets revealed rutile needles and apatites were also observed, but differences in size, shape and distribution patterns were noticed compared to Tanzania garnets. Tanzania garnets exhibited all types of observable fluid inclusions such as ““ fingerprint““ pattern, called Type Ⅰ-A, liquid-only (L) single phase fluid inclusion, called Type Ⅰ-B and Type Ⅱ-A ( L S), Type Ⅱ-B ( L V) and Type Ⅲ-A (L Sylvite even if all examined garnets from three localities retained ““fingerprint““ features, so called, partially healed fractures, in common. Chemical composition, Raman microspectrometry and Fourier transform infrared (FT-IR) analysis taken turned out to be useful methods for the purpose of this study. Using consequences of SEM-CL and inclusion study, accordingly, the locality identification of gem-quality garnets is capable of being available in further application for other kinds of gemstones.     

Isotope hydrological study of mean transit time in the granitic Strengbach catchment (Vosges massif,France): application of the FlowPC model with modified input function

Measurements of ¹⁸O concentrations in precipitation, soil solution, spring and runoff are used to determine water transit time in the small granitic Strengbach catchment (0·8 km²; 883–1146 m above sea level) located in the Vosges Mountains of northeastern France. Water transit times were calculated by applying the exponential, exponential piston and dispersion models of the FlowPC program to isotopic input (rainfall) and output (spring and stream water) data sets during the period 1989–95. The input function of the model was modified compared with the former version of the model and estimated by a deterministic approach based on a simplified hydrological balance. The fit between observed and calculated output data showed marked improvements compared with results obtained using the initial version of the model. An exponential piston version of the model applied to spring water indicates a 38·5 month mean transit time, which suggests that the volume in the aquifer, expressed in water depth, is 2·4 m. A considerable thickness (>45 m) of fractured bedrock may be involved for such a volume of water to be stored in the aquifer. Copyright © 2005 John Wiley & Sons, Ltd.     

利用Lageos 1 SLR资料解算1990-2001年的地球定向参数

利用 12年的Lageos 1卫星激光测距资料 (1990 - 2 0 0 1)解算得到了地球定向参数 (EOP) ,将该序列的结果与同期的EOP(IERS)C0 4进行比较 ,其外符精度为 :极移XP— 0 .4 0mas,YP— 0 .4 2mas ,日长变化Dr— 0 .0 35ms。     

Damage identification method using harmonic excitation force considering both modelling and measurement errors

A method of structural damage identification using harmonic excitation force is presented. It considers the effects of both measurement and modelling errors in the baseline finite element model. Damage that accompanies changes in structural parameters can be estimated for a damaged structure from the change between measured vibration responses and ones calculated from the analytical model of the intact structure. In practice, modelling errors exist in the analytical model due to material and geometric uncertainties and a reduction in the degrees of freedom as well as measurement errors, making identification difficult. To surmount these problems, bootstrap hypothesis testing, which enables statistical judgment without information about these errors, was introduced. The method was validated by numerical simulation using a three‐dimensional frame structure and real vibration data for a three‐storey steel frame structure. Copyright © 2005 John Wiley & Sons, Ltd.     

Optimal Compensation and Implementation for Adaptive Optics Systems

This paper develops a compensation algorithm based on Linear–Quadratic–Gaussian (LQG) control system design whose parameters are determined (in part) by a model of the atmosphere. The model for the atmosphere is based on the open-loop statistics of the atmosphere as observed by the wavefront sensor, and is identified from these using an auto-regressive, moving average (ARMA) model. The (LQG) control design is compared with an existing compensation algorithm for a simulation developed at ESO that represents the operation of MACAO adaptive optics system on the 8.2 m telescopes at Paranal, Chile. This revised version was published online in July 2006 with corrections to the Cover Date.     

APPLICATION OF GEOGRAPHICAL PARAMETER DATABASE TO ESTABLISHMENT OF UNIT POPULATION DATABASE

Now GIS is turning into a good tool in handling geographical, economical, and population data, so we can obtain more and more information from these data. On the other hand, in some cases, for a calamity, such as hurricane, earthquake, flood, drought etc., or a decision-making, such as setting up a broadcasting transmitter, building a chemical plant etc., we have to evaluate the total population in the region influenced by a calamity or a project. In this paper, a method is put forward to evaluate the population in such special region. Through exploring the correlation of geographical parameters and the distribution of people in the same region by means of quantitative analysis and qualitative analysis, unit population database (1km× 1km) is established. In this way, estimating the number of people in a special region is capable by adding up the population in every grid involved in this region boundary. The geographical parameters are obtained from topographic database and DEM database on the scale of